CAN YOU RETREIVE DATA FROM IPHONE WITH WATER DAMAGE?
Yes, of course you can!
When an iPhone comes into contact with water, it is usually best to open it up and get it dried as soon as possible. This gives us a much better chance at recovering your data. Sometimes all the phone may need is a screen, chargeport, or even a battery. These parts we stock, and we can have you up and running in no time!
In somecases, when water is sat for hours and hours, corrosion starts to form – this is where shorts occur and the surface mount components (Mosfets, Capacitors, etc) start to become corroded/damaged. Shorts can occur in different places depending on where the water entered – if it is on the main power line, then this will stop the phone from turning on regardless of the amount of new parts that you throw at it. This short will need to be cleared before the phone will even attempt to power on.
Here at Rossmann Repair we have dedicated board technicians who are able to diagnose & clear these types of problems to recover your data from your water damaged device. Whether it be a board fault, or a simple part replacement, we can do this for you.
Not located near NYC? Not to worry! Head over to https://rossmanngroup.com/shipping/ where you can start a mail-in repair to get your precious data recovered. Prices for this range from $300 to $650 depending on the significance of the damage.
RETREIVING DATA DEPENDS ON THE PROBLEM:
Depending on the problems you’re having, Rossmann repair will be able to help you out regardless. We will give you the best option possible to you so that we can have you up and running in no time with your precious data. Data recovery on these ranges from $300-$650 depending on how bad the problem is on your specific device, and you only pay if we can get the data! Feel free to come to our store, or send your device into us if outside NYC. You’re also welcome to call or email us if you have any questions.
We can recover data from broken Samsung Galaxy Phones after water damage!
Samsung phones have motherboards, same as a computer. The chips & components on the board are covered by soldered on shields, to keep RF out. If your Samsung Galaxy is damaged by water for instance, it’s a normal practice for a repair facility to try cleaning the phone. Unfortunately, few repair know how to do this properly. Some try cleaning the board without removing the shields since they do not know how to desolder them, or do not wish to take the time to perform this time-consuming process.
Imagine cleaning a phone board like taking a bath without removing your suit. How will you clean your skin if you are wearing a jacket? How does drying something dirty make it better?
When it comes to liquid damaged phones, we retrieve the data using a process that makes sense from the start – same as with our Macbook and iPhone repair services. We remove the shields, we address the liquid damage, we replace what is corroded, we fix corroded traces & vias, and remove unnecessary circuitry that hampers our likelihood of retrieving data off of a compromised device.
Is your Samsung Galaxy broken even with no liquid damage? We can still get its data!
Sometimes a power management IC dies, or maybe something else on the board has gone kaput – regardless, we can usually use the same techniques used by our Macbook logic board repair service to get the data off of your phone, even if it is dead.
Top Reasons To Have Your Repairs Done By Us
- We stock our parts, so that means that you save time.
- Our pricing is fair.
- We use grade A+ parts.
- We can repair motherboard component level issues.
